UK
DE
 Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

     

Resources

Contribute
Fluidization, air injection, aeration
Select a category
Fluidization, air injection, aeration
Silo knockers  
Fluidization, air injection, aeration
Air cannons  Vibration, vibrators  
Search

Wiki item

Do you have a wiki item for this page?  Contribute

Feature article

Would you like to add a feature article?  

Companies

Albrecht Ingenieurbüro GmbHBergEngel GmbHHAVER & BOECKER
KIK KunststofftechnikMancon Anlagentechnik GmbHSpoerl KG
Tridelta Siperm GmbHWAM GmbH
Do you want to list your company here?  Add company

Industry news

Do you have a news item for this page?  Contribute

Product news

Aeration Spot - Siperm R
Aeration Spot - Siperm R
Problems are often experienced when handling powdery and fined-grained bulk materials, such as flour, cement, pigments or fine plastic powders. Storage, mixing and discharge are difficult because these fine-grained powders do not flow freely. They tend to agglomerate and form bridges or tunnels around the silo outlet and, therefore, can only be removed effectively using some sort of discharge aid. A highly efficient solution to these problems are pneumatic Siperm-aeration components. They are supplied complete with all the necessary hardware (seal, washer, nut) and can also be retrofitted into existing systems. The SIPERM-R spots have a diameter of 100 mm. The pads are available as standard in sizes of 125 x 250 mm and 125 x 500 mm. Of course we also manufacture pads in special sizes.
11.03.2011  |  8592x  |  Product news  | 
Aeration pads and inserts - Siperm R, Siperm B, Siperm HP
Aeration pads and inserts - Siperm R, Siperm B, Siperm HP
Problems are often experienced when handling powdery and fined-grained bulk materials, such as flour, cement, pigments or fine plastic powders. Storage, mixing and discharge are difficult because these fine-grained powders do not flow freely. They tend to agglomerate and form bridges or tunnels around the silo outlet and, therefore, can only be removed effectively using some sort of discharge aid. A highly efficient solution to these problems are pneumatic Siperm-aeration components. They are supplied complete with all the necessary hardware (seal, washer, nut) and can also be retrofitted into existing systems. Ready-to-install aeration pads are supplied complete with all the necessary hardware (seal, washer, nut). They are ideally suited for installation at those sites where access is limited or difficult. The pads are available as standard in sizes of 125 x 250 mm and 125 x 500 mm. Of course we also manufacture pads in special sizes.
11.03.2011  |  9852x  |  Product news  | 
Do you have a product news for this page?  Contribute

White paper

Do you have a white paper for this page?  Contribute

Product description

Do you have a product description for this page?  Contribute

Photo reportage

Do you have a photo reportage for this page?  Contribute
PLATFORMS
SchuettgutPortal Recycling-Portal Solids Processing
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising