Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

Product description
12.07.2019  |  8851x
Share this item

Calculation of wheat requirements with flow measurement

Mass flow measurement with SolidFlow 2.0

In a food production company in Hongkong, different types of baked goods like bread or biscuits are produced.
In the plant, wheat is transported from a main silo to smaller production containers for further processing.
The material is transported to the rotary valve by means of a pneumatic conveying line (DN 100) into the container.
The objective of our customer was to obtain detailed information about the material flow in the conveying pipe between the main wheat silo and the smaller production container.

Process data:
Customer: Food producer (Hongkong)
Material: Wheat
Quantity: 5 t/h
Installation: Pneumatic conveying line after rotary valve
Function: Measurement of actual wheat consumption

Solution:

For monitoring and measuring the actual wheat consumption two SolidFlow 2.0 sensors have been installed. The SolidFlow 2.0 continuously measures solid quantities up to 20 t/h in free fall or in pneumatics.
In this application, the sensors are installed directly in the pneumatic conveying line from the main silo to production containers. This allows the quantity to be determined and monitored on-line in the process.
The commissioning of the sensors was carried out at night, in order to avoid failures in the daily business.


Customer benefits:

  • Calculation of wheat requirements
  • Daily consumption can be calculated in detail
  • Non-intrusive installation

Company information

More items

Moisture monitoring with M-Sens 2 Compliance with optimal process conditions
Moisture monitoring with M-Sens 2
Compliance with optimal process conditions Application In the process of manufacturing corks, the cork wood is milled to undergo a series of compression and molding steps. In order to make an useful compaction, one of the most important factors is the cork moisture. If the moisture is outside the recommended range the mass will be poorly formed. With low material moisture the mass is easily undone and in case of high water content more clogs are caused in the process. Process data Customer: Cork caps producer Material: Cork Installation: Mixer Function: Moisture monitoring Solution The M-Sens 2 is a continuous moisture meter based on microwave technology. In the described application M-Sens 2 was used in the mixer to monitor the cork moisture during the mixing process. In case of changes of the moisture content the heat injection in the mixer is changed to ensure an ideal moisture during the mixture. With moisture control, fast action can be taken to prevent non-specified materials from
13.05.2019  |  9019x  |  Product description  | 
Velocity measurement for careful material transport SpeedFlow 2.0-Pipe
Velocity measurement for careful material transport
SpeedFlow 2.0-Pipe Application For the production of hygiene products, the required fibre material has to cover long conveying distances. Too fast conveyor speeds cause a high loss of material, because the fibre material turns into dust. This dust development results in less yield at the end of the process as well as damaging the filter systems. Due to this problem, the manufacturer searched for a velocity measurement without material contact to ensure that the specified conveying speeds were not exceeded and to guarantee the required careful material transport. Process data Customer: Manufacturer of hygiene products (Germany) Material: Fibre material Installation: Conveyor pipe (DN 350) Function: Measurement of material speed for careful transportation The solution The SpeedFlow 2.0-Pipe sensor is designed for continuous velocity measurement of solids such as granules, powders and dust in pipes. The sensor is manufactured according to the
18.03.2019  |  8187x  |  Product news  | 
Filterbruchüberwachung zum Umweltschutz
Filterbruchüberwachung zum Umweltschutz

This item is only available in German
19.02.2019  |  5761x  |  Product news  | 
Online-Feuchtemessung mit neuer Funktion
Online-Feuchtemessung mit neuer Funktion

This item is only available in German
14.01.2019  |  5756x  |  Product news  | 
Compliance with permitted dust values Continuous dust concentration measurement
Compliance with permitted dust values
Continuous dust concentration measurement A food manufacturer refines dairy products. The dust-laden exhaust air created during the manufacturing process is extracted by suction and cleaned by industrial filter systems. With increasing abrasion of the filter elements, the dust content in the exhaust air may rise and lead to increased environmental pollution. The continuous dust measurement (mg/m³) is also regulated for this process. This official regulation is fulfilled by the plant operator with the installation of a calibrateable, electrodynamic measuring device. Process data Customer: Food manufacturer (Germany) Product: Dairy product powder Permitted limit: 20 mg/m³ Installation location: Clean gas side after a dust cyclone Function: Continuous dust measurement The solution The ProSens system can be calibrated and continuously monitors clean gas sides after filter elements for permissible dust concentrations. The calibration With the Dosed-Reference-Method developed
10.12.2018  |  9575x  |  Product news  | 
Blockage detection by ProGap S Transportation of minerals
Blockage detection by ProGap S
Transportation of minerals Application In the extraction or processing of natural stones those stones (basalt and lava) in different sizes are transported to a first screening by a conveyor belt. In some cases the screen may occasionally become blocked. As soon as the screen is clogged, the stones jam in the feed chute. If this blockage reaches the previous belt, it might be damaged. The common consequences: costly and time-consuming production downtimes. Process data Costumer: Mineral company Material: Stones (basalt and lava) Installation: Feeding chute behind conveyor belt Function: Protection of conveyor belt Solution The ProGap S with filling-signal-suppresion is a universal and flexible sensor for level detection, based on proven microwave technology. In this application the ProGap S is used to detect the dumming of the stones in the discharge chute after the conveyor belt. Upon reaching a critical level monitored by the ProGap S, the transportation
08.10.2018  |  17611x  |  Product news  | 
Contactless flow measurement in building materials industry Elimination of material build ups and pollution
Contactless flow measurement in building materials industry
Elimination of material build ups and pollution Application A manufacturer of building materials producing drywall products. The production process uses clay, which is fed by a screw conveyor from a silo onto a conveyor belt. Between the two conveying devices the material quantity requires to be measured. This was performed by an Impact Flowmeter. Using the Impact Flowmeter the clay caused contamination and material build up. Our client contacted SWR to offer a solution to eliminate the current problems and also being able to increase the throughput. The system had to be able to be maintenance free over a long period. Process data Customer: Building materials industry (Germany) Product: Clay Volume: 650 kg - 3 t/h Installation location: Freefall after screw conveyor Function: Contactless measuring in freefall, replacement of an Impact Flowmeter Solution The MaxxFlow HTC is a non-contact flowmeter capable of measuring high flow rates of dry bulk solids from the discharge
01.08.2018  |  12082x  |  Product news  | 
Screen break detection for monitoring of ground material Particle sensor for on-line monitoring of coarse grain in the flow
Screen break detection for monitoring of ground material
Particle sensor for on-line monitoring of coarse grain in the flow Application In many industrial processes control screenings and fractionation play an important role, as well as the reliability of the used screens. In continuous processes a screen damage can cause significant costs. In case of such a damage great quantities of screening material have to be destroyed or sieved again. A product recall, if necessary, can be very expensive for the manufacturer. The analysis of grain size in a material flow is time consuming and not suitable for the detection of a sieve failure arising in a short term. Even a continuous maintenance or a regular exchange of the sieves can‘t prevent a defect. The screen break detection Paddy is helpful here. Process data Costumer: Bulk processors and manufacturers Material: Any kind of bulk material Installation place: Discharge of material after sieve Function: Monitoring of grain size after screening process or fractionation Solution Paddy is a particle sensor which
08.05.2018  |  12938x  |  Product news  | 
Moisture measurement to assure material quality Optimal adjustment of the drying process in pellet production with M-Sens 2
Moisture measurement to assure material quality
Optimal adjustment of the drying process in pellet production with M-Sens 2 Application A manufacturer of wood pellets processes raw materials such as planing chips or wood chips (wood waste) to produce wood pellets. After delivery of the wood waste, it is cleaned from extraneous material like metal and stones by a separator. Afterwards the material is crushed by a hammer mill and dried. The crushed material is then transported by a conveyor belt through a 90 °C convection oven. After leaving the oven a screw conveyor transports the wood chips to a storage silo. To assure the material quality, it is desirable for the moisture of the material to be measured during its transport to the storage silo. If the moisture is not correct, the drying process should be changed automatically. Process data Customer: manufacturer of wood pellets (Germany) Material: chipped wood Transport means: screw conveyor Installation location: screw conveyor after oven Moisture: 3 - 8 % Solution After the drying process the material‘s
09.04.2018  |  15186x  |  Product news  | 
Dust monitoring with ProSens on clean gas side Exhaust gas cleaning in a pneumatic conveyor system
Dust monitoring with ProSens on clean gas side
Exhaust gas cleaning in a pneumatic conveyor system Application An international mining company extracts minerals under ground for the fabrication of fertilizers. For the long term improvement and safety of the structure stability fillings and binders (dry bulks) with defined recipes are injected locally into former mining cavities. These materials are delivered above ground, stored in silos and afterwards transported in a closed-pipe pneumatic conveying system to storage silos below ground. There the fillings and binders are mixed with a salt solution, pumped to the cavities and eventually harden. The silos used for the intermediate storage are under negative pressure for safety reasons. They are equipped with a silo vent filter (main filter) and a downstream security filter (secondary filter). This assures the air purity according to legal regulations, which is measured constantly after the security filter. When a specified limit value is reached, an alarm should be transmitted to the control room. Process
12.03.2018  |  15462x  |  Product description  | 
Mass flow measurement with SolidFlow 2.0 Production of montan wax
Mass flow measurement with SolidFlow 2.0
Production of montan wax Application In an opencast mine, brown coal with a very high content of wax is mined. From this coal, raw montan wax is obtained in different process steps. Therefore, the coal is crushed, dried and impinged with an environmentally friendly solvent to separate the wax from the coal. The acquired montan wax is transported into an evaporation system, where it evaporizes in several stages. After that it is transported via pumps to spray towers, where wax balls (wax granulates) are produced. At the outlet of the spray towers the granulate falls through a down-stream sieve into a pipe. Our customer’s aim was to determine the quantity of the obtained material continuously. Process data Costumer: Romonta, Amsdorf (Germany) Product: Montan wax, granulate Quantity: 6 t/h Installation place: Pipe after spray towers Function: Measurement in freefall after silo Solution The SolidFlow 2.0 has been specially developed for measuring solid volumes,
12.02.2018  |  15159x  |  Product news  | 
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked