Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

News items April 2019

Post your news
Dinnissen Vacuum Coating Technology more than 25 years of innovation
Dinnissen Vacuum Coating Technology
more than 25 years of innovation The invention of the vacuum coating process, more than 25 years ago, was an evolution of the Dinnissen Pegasus® Paddle Mixer. In this double-axle mixer the product is raised in a fluidized zone, giving a gentle, fast and energy efficient mixing process. In experiments carried out in a special mixer under vacuum conditions high concentrations of liquid were sprayed onto the feed pellets. Upon removal of the vacuum the liquid was drawn deeply into the coated pellets. In this way Dinnissen succeeded to gradually increase the fat content of pellets up to 42%. The vacuum coating process also helps with retaining the taste and color of the product, and with preserving the action of functional additives, such as vitamins, minerals, ameliorators, yeast and enzymes. In a Pegasus® Vacuum Coater, functional additives are introduced after the heating stage, which ensures that heat-sensitive substances remain active after being added to the product. An additional advantage of
30.04.2019  |  7034x  |  Press release  | 
Five major projects at JH and all at the same time A handful among the projects / deliveries of the past few weeks
Five major projects at JH and all at the same time
A handful among the projects / deliveries of the past few weeks
30.04.2019  |  2693x  |  Photo reportage  | 
Dewatering screens
Dewatering screens
In total 5 custom made dewatering screens for dewatering of pre-washed waste are on their way to our customer. The screening machines are entirely made of stainless steel.
30.04.2019  |  2436x  |  Product news  | 
NEW MasterSip Capsule Filter MasterSip Capsule Filter is designed for use in sterile air and gas filtration in biopharm
NEW MasterSip Capsule Filter
MasterSip Capsule Filter is designed for use in sterile air and gas filtration in biopharm MasterSip Capsule Filter is designed for use in sterile air and gas filtration in biopharmaceutical and other applications. Composed of a hydrophobic PTFE membrane and a polyetherimide housing, these capsule filters provide an alternative to a stainless steel housing/filter combination and thus reduces operating costs and maintenance time. Engineered polyetherimide material allows multiple SIP (steam-in-place) cycles at high pressures and temperatures. Retrofits Pall Novasip TM capsule. For more info contact us>>
27.04.2019  |  2524x  |  Product news  | 
Efficiently track flange inspections, shutdowns and repairs
Efficiently track flange inspections, shutdowns and repairs
Brady Corporation has developed a new, highly visible and reliable Flange tag with tearable components to easily track various stages of shutdowns, flange inspections, leak testing and repairs. Highly visible and efficient The Flange tag is offered in full colour and high resolution for maximum visibility, and is completely customisable for efficient use in a wide range of applications. The number of tag components is adaptable to the amount of inspection and repair phases needed and tag components can be perforated for easy tearing and tracking of various stages of inspections and repairs. Brady's Flange tag can include information on both sides and may even contain instructional drawings thanks to the high resolution print. Every Flange tag comes with a precut hole so it can easily be fastened to a flange or serve other applications in the workplace. Improved legibility with on-site printing Brady's new Flange tag can be written on, and also offers improved legibility
26.04.2019  |  7996x  |  Product news  | 
International conference in May celebrates 25th anniversary of LUM GmbH in Berlin
International conference in May
celebrates 25th anniversary of LUM GmbH in Berlin LUM GmbH is a leading international provider of innovative measurement technology for dispersion analysis and materials testing. Since the founding of the company by Prof. Dr. Dr. D. Lerche in 1994, LUM is also obliged to science. The company promotes science and technology and contributes by own research work to the further development of the competence fields: particle characterization, suspension and emulsion analysis and stability analysis and determination of adhesive and bonding strengths. LUM celebrates its 25th anniversary by organizing the 9th International Conference Dispersion Analysis and Materials Testing in Berlin from 22 – 23 May 2019. The final programme invites particle scientists, formulators of dispersions and emulsions, material testers from all over the world to Berlin, to exchange know-how and experiences. The keynote lecture ”Progress in particle characterization by sedimentation analysis“ will be given by Prof. Dr.-Ing. Wolfgang Peukert,
26.04.2019  |  6882x  |  Press release  | 
Drumscreen
Drumscreen
Yet another drumscreen leaving our workshop. This one is heading to a customer in the United Kingdom. This 9m long, 3m width drumscreen will be used In a recycling plant to screen incinarator bottom ash. After screening on particle size the recovery of valubale materials will proceed more efficient. Therefore this drum will do its part in the new circular world. For more information, please visit our website.
26.04.2019  |  2230x  |  Product news  | 
Maximized separation quality with minimized process costs GSort – The key to perfect separation
Maximized separation quality with minimized process costs
GSort – The key to perfect separation With the GSort Allgaier Process Technology is presenting a completely redesigned separation table for efficient separation of dry and non-sticky moist materials according to their density. Thanks to its new design, the GSort can also be used for sorting tasks that could previously only be solved using water-based processes, e.g. setting machines. In contrast to previous separation tables, the GSort can solve a wider range of tasks not only in the recycling industry - especially with regard to heavy products such as slags or shredded scrap mixtures between one and 80 mm in size. It can also be used in mining. There the GSort can supplement or completely replace conventional water-based processes such as wet setting tables for product separation. The resource water is therefore no longer required. The process costs in following steps are minimized and the overall invest is reduced. In particular, the costs for the supply and discharge of water as well as for the treatment
24.04.2019  |  6297x  |  Press release  | 
Sesotec Canada’s move provides base for further growth Demo centre for product testing and customer training
Sesotec Canada’s move provides base for further growth
Demo centre for product testing and customer training Guelph Ontario / Schönberg, April 2019 Sesotec Canada Ltd. is a subsidiary of Sesotec GmbH, a manufacturer of metal detectors, x-ray inspection systems and sorting systems based in Germany. For over four years, Sesotec Canada was based in Cambridge, some 90 km west of Toronto. As of 1 April, it moved from Cambridge to Guelph. Sesotec Canada is expanding rapidly and the premises available in Cambridge became too small to cope. For this reason the company made the decision to move to Guelph, some 75 km south-west of Toronto. Situated only one hour’s drive from Canada’s largest airport in Toronto, the new location at 275 Hanlon Creek Boulevard Unit 3 provides enough space for offices, a meeting room and a showroom with demo equipment. Metal detection, x-ray inspection, and checkweighing systems will be available for product testing and customer training. In addition, the new location also houses on-site spare parts storage, making it possible to quickly support customers
24.04.2019  |  6547x  |  Press release  | 
ATM - Starter Set for the preparation of selected materials
ATM - Starter Set for the preparation of selected materials
Solution Boxes which contain specific consumables tailored to the preparation of a particular sample material. The boxes are designed to serve as a start-up aid for the preparation of defined materials for microscopy. They help to make sample preparation more efficient and less time-consuming. The boxes contain an illustrated guide for easy use. Solution Boxes are available for a variety of materials. ATM will gradually extend the portfolio to cover the preparation of many more materials. Our brochure "Sample Preparation" is also updated to new consumables and preparation methods.
17.04.2019  |  1758x  |  Product description  |   | 
Allgaier CD Dryer sets new standards
Allgaier CD Dryer sets new standards
The call for energy-efficient devices is becoming ever louder in drying technology. At the same time, cost pressures and the demand for end-product quality are increasing. Especially for drying solids dissolved or suspended in liquids, Allgaier Process Technology now has a solution that satisfies the stringent demands of the industry: the CD Dryer. The CD Dryer is an indirectly heated contact dryer. The solids are dried by heat conduction from a steam-heated disc to the liquid product applied to the disc. The CD Dryer achieves outstanding drying results in various branches and areas. It can be used in virtually every branch of process engineering in the chemical industry, ranging from the ceramics industry to waste management, wastewater treatment and breweries. In all of these areas, the new CD Dryer represents an interesting alternative to conventional drum dryers that are usually used to dry solids dissolved or suspended in liquids. The space required by the disk
16.04.2019  |  5747x  |  Product news  | 
Robust coupling monitoring Swiveling lever as contact sensor at silo filling pipe
Robust coupling monitoring
Swiveling lever as contact sensor at silo filling pipe The MOLOSswing swiveling lever limit switch is mounted at the silo filling pipe as a contact sensor. As soon as a hose is connected, the swiveling lever has to be moved aside and thereby the switch is activated. There are different models with mechanical and inductive switches. For potentially explosive atmospheres a special inductive switch according to NAMUR standards is offered as well. Especially in tough surroundings like the construction or cement industry the MOLOSswing is the ideal solution in order to monitor the connection at the hose coupling of the silo filling pipe.
16.04.2019  |  7462x  |  Product news  | 
Stainless steel reducers material no. AISI 304 - ex stock with outer diameters from 38.0 mm till 168.3 mm
Stainless steel reducers material no. AISI 304 - ex stock
with outer diameters from 38.0 mm till 168.3 mm Stainless steel reducers from HS Umformtechnik - ex stock
15.04.2019  |  8329x  |  Photo reportage  | 
New Safetrak for faster equipment inspections
New Safetrak for faster equipment inspections
With Brady's new Safetrak, time consuming paper based equipment inspections can become a lot faster. Planning, inspecting and reporting can be streamlined, customised and largely automated in the Safetrak app to save time. Digital support for equipment inspections Safetrak enables you to keep track of inspections digitally and eliminates the need to make time consuming duplicates, decipher hasty handwriting or search for lost inspection papers. At the same time, the web application also includes an advanced inspection planning system that offers a full overview of every inspection planned and enables users to easily plan recurring inspections. Book in, book out Safetrak can be used to keep track of a wide range of equipment such as personal protection equipment, drills, hammers, screwdrivers, scaffolding, ladders, label printers or lockout bags. With Safetrak, every tool can easily be checked in or out as long as it is labelled with a serial number, barcode or RFID
12.04.2019  |  1485x  |  Product news  | 
New high shear mixing concept Cyclomix line extended
New high shear mixing concept
Cyclomix line extended Hosokawa Micron is launching a new concept for mid-size Cyclomix high shear powder mixing systems with exchangeable product bowls of 5 litres and 15 litres. Based on the successful Cyclomix technology, this concept will provide even more versatility for customers. The systems will be available with a range of options allowing users to select the optimal configuration. Thanks to exchangeable 5-litre and 15-litre product bowls, customers can use a single drive unit with ancillaries and only need to adjust the product bowl to suit their needs. The modular design includes options for: * Cooling by tap water or water chiller * Standard or pharma control system * Lip seal or mechanical seal for the rotor * Standalone or 'through the wall' design * Lift to support bowl changing This system will fit into the Cyclomix range in between the Mini Cyclomix for R&D purposes and the larger Cyclomix concept which is suitable for bowls of 50 litres, 75 litres and 100 litres.
12.04.2019  |  2215x  |  Product news  |   | 
Copal wins Best Intralogistics Innovation Award in Paris Copal winner of the Innovation Award at the SITL show
Copal wins Best Intralogistics Innovation Award in Paris
Copal winner of the Innovation Award at the SITL show Our Copal team is very happy and proud to announce that we won the Innovation Awards Intralogistics in Paris last week. Despite of the quality of its competitors' solutions, unanimously, the jury decided that the Best Innovation Award Intralogistics goes to Copal Handling Systems for its high-capacity automated container unloading solution for loose cardboard boxes. Responding to the shortage of labour in the logistics sector, it limits the physical work of repetitive or repetitive manual handling. «Copal Handling Systems provides a highly sought-after automation solution for the unloading of sea containers whose loads are optimized to their maximum capacity manually in many countries, particularly in Asia. In Europe, unloading is a challenge. With this 3D vision solution combined with sensors and an automatic plug-in mechanism, de-stocking is automated,» explains Xavier Derycke, supply chain director of the Rexel Group. «Since their creation, the Innovation Awards
12.04.2019  |  1569x  |  Press release  | 
Stop with dust around empty Big-Bags / FIBC Poeth Big-Bag compactor
Stop with dust around empty Big-Bags / FIBC
Poeth Big-Bag compactor Big-bags are increasingly being used in the processing of raw materials. After big-bags are emptied, they are often folded. Unnecessary dust is created during folding. This substance emission is avoided by means of a big-bag compactor with an integrated compressed air-cleaned filter, and the amount of waste is reduced to a minimum package. The empty Big-Bags are packed dust-tight at the end in an endless foil. The filter is suitable for very different powders from very fine to very sticky. The unit is mobile or non-mobile wheels, and equipped with its own control / control box. A traditional bag compactor is often used to compact empty big bags, but these often get stuck. The Poeth Big-Bag compactor, however, has been specially developed for big-bags. The system can be supplied fully ATEX certified internally and externally.
12.04.2019  |  2565x  |  Product news  | 
Emulgator, Colloid Mill
Emulgator,
Colloid Mill we are offering different Colloid Mills, with capacities from 10 kg/h up to 10.000 kg/h, with cooling connections,with regulation of the wanted fineness, staying or separate executions, with separate mounted engine
11.04.2019  |  6530x  |  Press release  | 
New High-Temperature Self-Regulating Trace Heaters ELSR-SH and ELSR-SHH
New High-Temperature Self-Regulating Trace Heaters
ELSR-SH and ELSR-SHH The self-regulating trace heaters ELSR-SH and ELSR-SHH are designed for high temperatures up to 250 °C in industrial applications. They are also approved for use in hazardous areas and withstand aggressive chemicals, oil and fuel.
11.04.2019  |  1011x  |  Product news  | 
Dinnissen launches largest centrifugal sifter to the market with ATEX zone 20 internal type approval
Dinnissen launches largest centrifugal sifter to the market
with ATEX zone 20 internal type approval Producers that process bulk goods can scale up considerably thanks to the unique new sifter, with a capacity of 25 - 30(.) tonnes of product per hour. - Use of ultrasound - Closable coarse outlet - Large inspection hatches for easy inspection and cleaning - Notified Body approval - Type approval for ATEX zone 20
10.04.2019  |  6230x  |  Product news  | 
Reliable representative samples in a very short time Fast, gentle comminution and homogenisation
Reliable representative samples in a very short time
Fast, gentle comminution and homogenisation The Knife Mill Pulverisette 11 provides a homogeneous sample in a very short time due to its special design. Each subsample taken from any location in the grinding vessel is representative for the original sample and thus ensures an exact, significant analysis. And that for a wide range of different materials, regardless of whether the sample is dry, moist, soft, medium-hard, fibrous or oily. Ideal for sample preparation in the fields of foodstuffs or animal feed testing, agriculture and forestry, biology, pharmaceuticals and chemistry. For each application the perfect accessories The standard knife made of stainless steel can be used for comminution of nearly all materials due to its four blades and a well-conceived geometry. For comminution of brittle, hard samples we recommend the sickle knife made of stainless steel. The sickle knife with serrated blades is ideal for grinding especially fibrous, tough or sinewy samples, such as fish, meat, asparagus or bamboo. Even
10.04.2019  |  6266x  |  Press release  | 
Containment as the solution to avoid OELs Thielmann whitepapers
Containment as the solution to avoid OELs
Thielmann whitepapers Health and safety in every industry is of critical importance, however it seems ever-present in the Chemical and Pharmaceutical Industries where a multitude of risks present themselves on a daily basis. This white paper provides basic information about what OELs are, and explores the different Occupational Exposure Limits (OELs) by region and country across the world. The aim is to give the reader an understanding of the limits that may apply to substances that affect their business and industry, and also examine the legislative requirements and recommendations for each of their respective governing bodies. The opening and closing stages during container operation are the most critical points for unintentional exposure to dangerous substances within the workplace, however by using the correct containment system, these occupational risks can be drastically minimized and even eliminated altogether.
10.04.2019  |  8996x  |  Product news  | 
Inspection of wheat elevator to prevent stoppages Muller Beltex regularly performs inspections on bucket elevators
Inspection of wheat elevator to prevent stoppages
Muller Beltex regularly performs inspections on bucket elevators Inspection of wheat elevator to prevent stoppages Muller Beltex regularly performs inspections on elevators in order to monitor their status. By carrying out inspections, we can prevent many stoppages caused by calamities. After completing an inspection, we draw up an extensive report explaining the situation to the client. This is followed by a comprehensive quote including a work plan describing what actions are required. Based on a phased plan, the actions are performed in a controlled way and all associated risks are identified to ensure that the work is performed safely. During this inspection of a wheat elevator, for example, a tower crane was needed to replace the drive roller. The inspection was performed while the drive roller at the top of the elevator was being replaced. Eventually, the elevator belt will need replacing during the second half of this year due to drying out. We can then replace the worn fasteners on the belt at the same time. The photos
10.04.2019  |  6359x  |  Press release  |   | 
4B Deutschland at Powtech Conveying and hazard monitoring components
4B Deutschland at Powtech
Conveying and hazard monitoring components 4B Deutschland stand and team, 4B Deutschland stand, 4B hazard monitoring components and sensors, 4B Deutschland Team, 4B Deutschland stand at Powtech 2019, 4B Deutschland Stand, 4B forged chains
10.04.2019  |  6337x  |  Photo reportage  | 
NEW, an intelligent connection box for industrial weighing. Quick fault finding and remedian.
NEW, an intelligent connection box for industrial weighing.
Quick fault finding and remedian. Interferences are a source of annoyance, cause business interruption or disturb your process, so they cost money. That means a quick remedy is a must. The new PENKO cable connection box type SJB190 helps you doing so. Every load cell, up to four per weighing system, is monitored individually. Deviations outside the pre-set tolerances are made visible on the display and reported via a potential-free contact. On the front of the instrument you find a clear OLED display, good visible under sunny circumstances, with control buttons. This allows fault finding by checking the measurement signal of each load cell separately by simultaneously comparing it with the average of all sensors and the excitation voltage. You localise immediately without searching whether, for example, a cable is broken, a load cell drifts or was overloaded. If necessary, you can take preventive action and replace the defective sensor. This intelligent connection box replaces the usual one, since no
10.04.2019  |  2252x  |  Product news  | 
AZO cyclone screener Screening under containment condition
AZO cyclone screener
Screening under containment condition Containment has been a core issue for years, particularly in the pharmaceuticals industry. Low occupational exposure limits and complex toxicological evaluations pose special challenges for processors and manufacturers of highly active substances with regard to process safety. On top of this, there are new regulations, such as the modified EU GMP directives, which came into force on 1 March 2015. Thanks to engineering design solutions, today's plants now generate so little dust in regular operations that it is possible to rule out any threat to the health of plant operating staff from harmful dust. The situation is far more critical when maintenance or cleaning work has to be carried out. Inspection hatches have to be opened in order to inspect working parts in machinery and plants. In the case of maintenance activities, maintenance staff have to remove worn components and install new replacement parts. In the past, this was only possible within isolators when smaller
09.04.2019  |  6078x  |  Press release  | 
Small fluidized bed system for high agglomeration demands Compact, fast, economical: New fluid bed concept from Glatt starts after just 12 days
Small fluidized bed system for high agglomeration demands
Compact, fast, economical: New fluid bed concept from Glatt starts after just 12 days At Vitafoods 2019 in Geneva, plant engineering and process development specialist Glatt Ingenieurtechnik will be presenting a new plant concept for continuous powder agglomeration: "GF ModFlex" is extremely economical, fits into any hall thanks to its modular design and can be flexibly adapted to meet individual customer requirements. Transferring fine powders and powder mixtures into uniformly porous, practically dust-free, highly soluble and perfectly meterable granulates – this is what the new "GF ModFlex" plant concept achieves in an endless loop, with consistent safety and quality guaranteed. Multi-step and multi-zone processes offer almost unlimited freedom in product design. The space-saving innovation is based on the established Glatt fluid bed technology and, thanks to gentle process control, preserves the nutritional and functional properties of the products. With its compact modular system, Glatt caters for manufacturers who want to upgrade or renew their
09.04.2019  |  7876x  |  Press release  | 
Daxner at Powtech 2019 - Booth 5-275
Daxner at Powtech 2019 - Booth 5-275
Fully automated mixing and dosing system for producing ready-made ingredient mixes is the top issue at Powtech 2019. System´s 3D-container transport system doses and weighs minor ingredients directly from silos. This system produces complex batch mixes, prevents cross contamination for all handled allergens and complies with sanitary regulations. Via the product intake station VIB & PRESS, which is used for the intake and control screening of powdery products, especially for difficult products like egg powder, pepper powder etc., ingredients are fed into the mixer. VIB & PRESS is an innovation from Daxner, which can perform two actions at once: Additional to the vibrating screen (VIB) which performs the screening action, the products are pressed through a flat screen (PRESS) by rotating paddles. Agglomerations and lumps in the products are thus dissolved gently. Daxner´s mixing systems always include sophisticated systems of control mechanisms. The exhibited centrifugal
09.04.2019  |  6592x  |  Press release  | 
AZO Pre-Engineering – Everything from a single source AZO at Powtech in Nuremberg hall 1, stand 356
AZO Pre-Engineering – Everything from a single source
AZO at Powtech in Nuremberg hall 1, stand 356 Apart from customized solutions for automating raw materials and processes, AZO also offers the possibility to support the customer in planning production logistics by conducting concept studies. This service is performed by the engineering & services division (AZO®e&s) as part of the pre-engineering process, tailored to the customer's existing or planned new system. Parallel to the plant design, additional process equipment is harmonized and planned with potential vendors. Apart from systems and process engineering, the logistics, media supply and staff rooms also play an important part. They can, if necessary, also be taken into consideration early on during this phase in order to create an ideal basis for further procedures (architecture, planning of budgets etc). Regardless of whether it concerns an existing brownfield plant, where the aim is to refurbish existing buildings and/or equipment in accordance with the latest state-of-the-art technology (retrofit) and
09.04.2019  |  6990x  |  Press release  | 
The new Mixer Mill MM 500 Best in class for sample mixing and pulverization
The new Mixer Mill MM 500
Best in class for sample mixing and pulverization Performances, handling, application fields and design of the MM 500 make it the perfect combination of a classic Mixer Mill and a Planetary Ball Mill. Retsch’s Mixer Mills are true all-rounders which are used in laboratories all over the world. The new Mixer Mill MM 500 is a versatile bench-top unit which has been developed specially for high sample thoughput in dry, wet and cryogenic grinding of small sample amounts. This powerful mill mixes and pulverizes powders and suspensions efficiently and quickly down to < 0.1 µm. The robust high-performance drive makes the MM 500 suitable for applications like mechanical alloying and echanochemistry. The user-friendly clamping system facilitates safe operation. For intermittent sample extraction, the jars remain conveniently clamped. Benefits at a glance: - Powerful grinding with up to 35 Hz - Grind sizes < 100 mm - Grinding jar volumes 50 ml, 80 ml, 125 ml - Screw-Lock jars, pressure-tight up to 5 bar -
09.04.2019  |  3555x  |  Product description  |   | 
Nampak Inspection & Coding Systems Nampak Inspection & Coding Systems new Partner of Sesotec in South Africa
Nampak Inspection & Coding Systems
Nampak Inspection & Coding Systems new Partner of Sesotec in South Africa Schönberg, April 2019 Since 1 June 2018 Sesotec GmbH has a new partner in South Africa with Nampak Inspection & Coding Systems. The partnership relates to the "Inspection Division" and primarily concentrates on the food sector, but it is also planned to utilise the existing potential in the plastics industry and to conquer regional markets with active campaigns. At the ProPak Africa trade fair that was held in Johannesburg from 12 to 15 March 2019 Sesotec presented the VARICON+W metal detection system with Intuity metal detection coil, and the Raycon ex1 X-ray scanner at the Nampak trade fair stand. Potential customers were impressed by the performance and ease of use of these systems. In the opinion of both Sesotec and Nampak the trade fair appearance was a great success. In addition to sales and distribution, service is another strong point of Nampak, which is why Nampak also will perform local service for Sesotec metal detection and X-ray systems. For further
08.04.2019  |  6154x  |  Press release  | 
Free Powder Flow Seminar in Frankfurt, Germany
Freeman Technology, the powder characterisation specialists, will be hosting a ‘Powder Flow Seminar’ on the 8th May 2019 at the Hyatt Place Frankfurt Airport Hotel, Germany. The free one-day event will introduce delegates to the benefits of powder rheology. The seminar will include presentations from Daniel Loeser, Product Manager at Freeman Technology, who will provide: •an introduction to understanding powder flow and powder behaviour •an evaluation of uniaxial testing to assess and rank powder flowability •a review of Process Analytical Technology for in-line assessment of powder behaviour Delegates will also hear from guest speakers, Andreas Nazet, Territory Account Manager, Micromeritics, who will provide an introduction to powder characterisation solutions; and Marek Lachmann from Chemische Fabrik Budenheim KG, who will discuss powder flow enhancement of pharmaceutical materials, and how powder rheology can be used to assess success. There will also
08.04.2019  |  1953x  |  Press release
PHOS4green @ Powtech 2019 Halle 3, Stand 3-249 Waste-free conversion of phosphorus-containing sewage sludge ashes into high-quality stand
PHOS4green @ Powtech 2019 Halle 3, Stand 3-249
Waste-free conversion of phosphorus-containing sewage sludge ashes into high-quality stand At Powtech 2019 in Nuremberg, the plant manufacturing and process development specialist, Glatt, is presenting a groundbreaking waste-free process that recycles the phosphorus from ash to produce ready-to-use high-quality fertilisers. Glatt Ingenieurtechnik will be presenting a market-ready process at Powtech that fulfils the legal obligation of German waste disposal companies to recover phosphorus. In the first step of the two-stage "PHOS4green" process, a suspension is produced from the phosphate-containing ash, a mineral acid and, depending on the objective, other components. The suspension is then spray granulated in the fluidised bed. This results in fertiliser granulates that are available to plants and soil, which can be discharged, filled and delivered directly after the desired grain size has been reached. "Fluidised bed granulation has been a mature process for decades, enabling a simple and safe introduction to fertiliser ordinance-compliant phosphate
08.04.2019  |  6202x  |  Press release  | 
GF ModFlex @ Powtech 2019, Stand 3-249 Continuous agglomeration of food ingredients already starts after 12 days
GF ModFlex @ Powtech 2019, Stand 3-249
Continuous agglomeration of food ingredients already starts after 12 days At Powtech 2019 in Nuremberg, the plant manufacturing and process development specialist, Glatt, is presenting new plant concept for continuous powder agglomeration: it’s extremely economical, versatile and, thanks to its modular design, is ready for operation in 2 weeks. With this compact modular system, Glatt is responding to manufacturers who want to upgrade or renew their machinery at short notice, with limited space and with production volumes of 100–3000 kg/h. Designed to meet market requirements, the Atex-compliant concept, equipped with WIP cleaning, also scores with an extremely short installation time of only 12 days and an integrated room and zone concept.
08.04.2019  |  6240x  |  Press release  | 
ProAPP® @ Powtech 2019, Booth 3-249 Powder synthesis by spray calcination with APPtec® now also available in lab scale
ProAPP® @ Powtech 2019, Booth 3-249
Powder synthesis by spray calcination with APPtec® now also available in lab scale Another highlight at Powtech 2019 in Nuremberg presented by Glatt, the plant manufacturing and process development specialist, is the continuous powder synthesis method: APPtec®. Using spray calcination in a pulsating hot gas stream at temperatures of 200-900 °C, powders with particularly narrow particle size distributions can be produced from a wide range of starting materials. The unique and easily controllable thermodynamic process conditions make it possible to precisely adjust the product properties — for example with regard to chemical composition, morphology, phase structure and coating or surface chemistry. In addition to the joint development of APPtec®-based powders and contract production, Glatt also offers reactors of the ProAPP® series in various sizes — such as for laboratory scale production.
08.04.2019  |  8071x  |  Press release  | 
AZO Modular big bag discharge station cost-effective and versatile
AZO Modular big bag discharge station
cost-effective and versatile Flexible bulk materials receptacles such as big bags have become firmly established for handling powders in a variety of branches. They have clear advantages over sacks when it comes to transporting and storing bulk materials. They are environmentally friendly, require less operating staff and storage space and reduce costs for transport and processes. AZO big bag discharge stations make it possible to discharge big bags without generating excess dust and to feed products reliably into the closed production plant. To improve efficiency and reduce costs even further, AZO has developed a modular concept for a big bag discharge station. The required components such as frame, support beams, chain hoist, discharging aids, big bag docking system, buffer bin and discharging unit can be chosen from a “construction set”, depending on the requirements. The entire discharge station can be configured to suit needs without outlay for design, which has a very positive effect
05.04.2019  |  8227x  |  Press release  | 
AZO ManDos – operator-guided manual weighing centre for the provision of micro quantities
AZO ManDos – operator-guided manual weighing centre
for the provision of micro quantities The operator-guided manual weighing centre ManDos is ideal for micro quantities that cannot be fully automated in a profitable manner owing to their consistency (physical properties) or production need (quantity and frequency). However, it is these micro quantities in particular that have a crucial impact on the recipe, meaning that proper control and documentation are essential during their addition to the manufacturing process. ManDos is ideal for the following situations: •Low batch frequency •Raw materials that are not suitable for automation •Frequent changes of ingredients •A large number of components •Limited investment resources •Requirement for end-to-end documentation Our expertise – benefiting you. ManDos can be used as a stand-alone system, but can also be expanded to a comprehensive, networked batch production system with host interface. The logical user guidance provides the best support for
04.04.2019  |  7393x  |  Press release  | 
Allgaier Process Technology at Bauma 2019 Product innovations in screening and drying/cooling
Allgaier Process Technology at Bauma 2019
Product innovations in screening and drying/cooling Allgaier Process Technology strengthens its position as market leader in drying/cooling and screening technology linked with digital services and launched three new products at Bauma 2019. Allgaier Drum Dryer/Cooler System Mozer are worldwide known for high-quality and high-performance drying and cooling systems. The new Drum Dryer/Cooler TK-D can be used for an extremely broad range of applications. It enables combined drying and cooling of dried solids approaching especially low temperatures, around the ambient temperature or the temperature of the cooling air used. Offering high energy efficiency through heat recovery in the drying process and evaporative cooling - the re-evaporation of residual moisture from the solid in the cooling process - in the cooling process, the TK-D has a reduced power consumption of nearly 20 %. The MSizer is based on the Sizer screening technology developed by Fredrik Mogensen more than five decades ago, with several screen decks
03.04.2019  |  7818x  |  Press release  | 
Solutions around the production control system AZO at Powtech 2019
Solutions around the production control system
AZO at Powtech 2019 Kastor has been expanded with functions for automated handling of micro quantities using AZO®RoLog New solutions from the Kastor family of products have been developed for AZO®RoLog – new robot-assisted dosing of micro quantities. •Kastor RoWeighControl for controlling robot-assisted weighing •Kastor RoRefill for refilling the dosing receptacle •Kastor RoStore for storage and transport of dosing receptacles and target containers •Kastor RoDataManager for managing job, formulation and receptacle data and settings. These Kastor solutions can either be used as “standalone” models or they can be integrated into a comprehensive Kastor manufacturing execution system. Of course, a solution of this kind is also adapted to customer IT environments (ERP/MES) and provides end-to-end batch tracing. It goes without saying that compatibility with previously implemented solutions using Kastor and ManDos is ensured. AZO®RoLog and the associated Kastor
03.04.2019  |  5949x  |  Press release  | 
Azo liquids – Solids meets Liquids AZO at Powtech 2019
Azo liquids – Solids meets Liquids
AZO at Powtech 2019 Azo liquids’ customers in the food, cosmetics and pharmaceuticals industries rely above all on the dependable and reproducible production processes of our plants. Maximum flexibility, efficient use of energy, fully automatic controls and consistent quality features are what set products from Azo liquids apart. Added to these advantages is our comprehensive industry expertise in all aspects of raw materials handling, from deliveries of raw materials to output and metering, mixing and controlling. AZO covers all areas of production and develops bespoke solutions for its customers. Above and beyond this, you can expect Azo liquids to provide professional plant engineering, taking full account of your particular requirements, and to collaborate closely with you in developing solutions for your process. Batch vacuum processing plants type zoatec® BG: mixing, dispersing and homogenising – Fresh power for your liquid processes The modular vacuum
02.04.2019  |  6068x  |  Press release  | 
Small, smaller, Deprag nanomat Reliable assembly of tiny screws
Small, smaller, Deprag nanomat
Reliable assembly of tiny screws Electronic components in computers and smartphones, or in household, entertainment and automobile technology, are indispensable in innovations relating to all areas of modern technology. Usually hidden from view beneath the product surface, extremely complex electronic systems must be designed, manufactured and launched onto the market in the shortest time possible at an acceptable price. They also need to be totally reliable and energy efficient products. Rapidly increasing capabilities and constant miniaturisation have characterised developments in electronics for decades. Deprag schulz gmbh u. CO. is known for continuous optimisation of their products and for leading the way with new developments in the assembly of miniature components. The screwdriving technology specialists have a specific screwdriver in their program especially for intricate assemblies – the NANOMAT. This screwdriver reaches highly accurate, extremely low torques from 8 Nmm to 300 Nmm at
02.04.2019  |  6835x  |  Press release  | 
Powder handling systems Thielmann whitepapers
Powder handling systems
Thielmann whitepapers The safe and accurate dosing of dry bulk materials is critical for operators who need to produce a mixed blend end product to exacting formulas, in a repeatable way, on large scales. From operators within the chemical, pharmaceutical, to nuclear, food and coatings industries, key considerations for powder dosing operations will vary from industry to industry. This white paper outlines the most crucial points that operators should consider when designing, building and managing their dosing operations. Please download your complimentary copy of this whitepaper to your device here:
01.04.2019  |  10418x  |  Product news  | 
AZO feeding hopper in hygienic design AZO at Powtech 2019
AZO feeding hopper in hygienic design
AZO at Powtech 2019 The hygienic design feeding hopper serves to feed bulk solids in powdered and granular form into closed materials handling systems, especially in areas calling for the highest standards in hygiene. Products can be fed from sacks, boxes, barrels or similar receptacles. The feeding hopper is available in two different grades of stainless steel and, depending on the surface finish, has surface roughness of < 0.6 µm or < 0.8 µm. The radii on the inside of the feeding hopper are greater than 50 mm and can be cleaned leaving no residue at all. Wet cleaning is done via an integral spray head. The gasket used for the lid can easily be replaced when needed, as it is not attached with adhesive. It is composed of silicone and is metal detectable. The feeding hopper is suitable for use in areas in zones 22 and 2 where there is a risk of explosion. To avoid dust escaping when sacks are discharged, an aspiration process can be connected that starts when the lid of
01.04.2019  |  6057x  |  Press release  | 
MORE POSTS
MAR
2019
FEB
2019
JAN
2019
DEC
2018
NOV
2018
OCT
2018
SEP
2018
AUG
2018
JUL
2018
JUN
2018
MAY
2018
APR
2018
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked