Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

       

News items December 2018

Post your news
Simatek Drum Feeder  Fills the buckets separately without waste
Simatek Drum Feeder
Fills the buckets separately without waste The Simatek Drum Feeder (patented in the EU and USA and patent pending in Chile) is a perfect feeding system when conveying fragile products - for both easy and poor flowing products. The system continuously fills the buckets separately without waste – no overlap required. The function makes it possible to run with a low chain speed in combination with high filling resulting in an increased capacity despite the low speed. This optimisation also ensures a minimum dust generation when conveying dusty products. The gap between the buckets means that there is only need for a forced guidance of the buckets at emptying, which implies significant cost savings on wearing parts and a substantial enhanced operational reliability. The drum feeder can advantageously be delivered for traditional Simatek elevators with overlap on the buckets, and it can likewise be retrofitted on existing elevators. The drum feeder is directly driven by the elevator chain and rated relative
18.12.2018  |  2876x  |  Product news  | 
DEPRAG launches new operation in Mexico DEPRAG announces the incorporation of its 100%-owned company
DEPRAG launches new operation in Mexico
DEPRAG announces the incorporation of its 100%-owned company DEPRAG announces the incorporation of its 100%-owned company “DEPRAG MEXICO Sociedad de Responsabilidad Limitada de Capital Variable”. The new subsidiary is located in the city of Guadalajara, western federal state of Jalisco. A brand new building with 560 square meters of combined office and production space has been rented in a resolutely modern industrial park. In light of DEPRAG’s strong sales growth in Mexico over the past years, the decision to open shop was only logical. The new operation will provide service and the integration of special machines for our customers. Guadalajara is Mexico’s second largest city with a metropolitan population of 5 m. The region is known as Mexico’s “Silicon Valley” because of the presence of major players in the electronics industry. DEPRAG’s globally active customers like Flex, Jabil, Continental and ZF all have production plants in Guadalajara. Dr. Erik Hallmann, CEO of DEPRAG, said: “Mexico has tremendous
17.12.2018  |  6429x  |  Press release  | 
Simple Emptying of large Refuse Containers HSM HL 7009 MGB – the compact horizontal baling press for industry
Simple Emptying of large Refuse Containers
HSM HL 7009 MGB – the compact horizontal baling press for industry The compact horizontal baling press HSM HL 7009 MGB, with a pressing power of 700 kN, is the economical waste disposal solution for industry. It has been designed to empty large refuse containers filled with cardboard or plastic films and which have a capacity of over 1 x 1100 litres or 2 x 240 litres. The baling press is filled using the integrated hydraulic lifting/tilting device which enables a marked reduction in the number of people required to compress the material. Thanks to the large loading aperture, even bulky pieces of cardboard are not a problem. With a cross-section of 1100 x 1100 mm and a bale length of about 1200 mm, the bales weigh up to 600 kilogrammes. The hydraulic sliding door ensures convenient operation and safety for the operator when the bales are removed. The bales have 4-fold horizontal strapping and, thanks to their optimized dimensions and weights, achieve an optimum truck loading – this compact, horizontal counter-plate press is perfectly
17.12.2018  |  2290x  |  Product news  | 
Poeth commissioned turnkey cocoa intake 200 m3 / hour  Z-Conveyor / Drum cleaner / Wind sifters / Sieving
Poeth commissioned turnkey cocoa intake 200 m3 / hour
Z-Conveyor / Drum cleaner / Wind sifters / Sieving cocoa intake Poeth Solids Processing has successfully commissioned a complete cocoa intake line for a capacity of 200 m3 / hour. The project aims to clean the cocoa just after it has been unloaded by the ship. The cocao must be stripped of product foreign parts such as dust, sand, stones, plastic etc. In general, the project includes: - Z-Conveyor 200 3 / hour (completely made of durable Hardox) - Drum cleaner - Windsifters - Dust Extraction 50,000 m3 / hour. - Big-bag fillers - Screw transports - Chain transport - Bucket elevator The installation is built according to the current requirements in the area of food safety. All plastic parts are e.g. provided with EC1935 / 2004 certificates. .
17.12.2018  |  2487x  |  Product news  | 
New SlimView Group Lock Box for efficient Lockout/Tagout Easily store, carry and apply padlocks
New SlimView Group Lock Box for efficient Lockout/Tagout
Easily store, carry and apply padlocks The SlimView Group Lock Box is an easy to carry lockbox with transparent cover that can store up to 12 padlocks and can double as a safe key deposit. It supports companies to more efficiently organise Lockout/Tagout and to reduce workplace accidents. 15-20% of workplace accidents are still related to maintenance, according to Eurostat. - Efficient and easy to use: a slim design with pre-cut mounting holes enables easy storage or mounting and a transparent door allows for efficient contents checks at all times. - Carry up to 12 padlocks: built-in padlock & key hangers for 12 padlocks. - Safe key deposit: easily apply up to 12 padlocks thanks to a recessed door, in order to lock keys inside until maintenance is done.
14.12.2018  |  8995x  |  Product news  | 
The first filling Machines for 2019 are on their way
The first filling Machines for 2019 are on their way
These 2 Votech filling Machines are going to package premixes for the animal feed industry. They are equipped with a net & gross weigher so that the customer can descend different types of product, both granulate and powdered product. Do you also want a Votech filling machine? Or more information? Then please contact us.
14.12.2018  |  1840x  |  Press release  | 
Ground Control Newson Gale New overview page
Ground Control Newson Gale
New overview page Static grounding of process equipment and other objects prevents the potential danger of build-up of electrostatic charges in ATEX and combustible environments. Newson Gale ground control systems continuously monitor if static grounding loops have low enough resistance to eliminate static electricity, report this to the user, and possibly stop processes in case of a faulty earthing, so that no further build-up of static charge can take place. ATHEX Industrial Suppliers has recently placed a new overview page on-line of all the different available ground control devices from Newson Gale.
13.12.2018  |  3020x  |  Press release  | 
22 meter ”Lutze Safe Load Systems” in the harbour of Ghent
22 meter ”Lutze Safe Load Systems” in the harbour of Ghent
Lutze Conveying BeLux finished at the end of November a job at a customer in the port of Ghent where we have installed 22 meters of our ”Safe Load Systems” on a belt of 1.000 mm width. We also adapted 3 loading points and we used ceramics on the inside as you can see in the pictures. Great job done by our German and Belgian technicians
13.12.2018  |  2581x  |  Press release  | 
Contactless measurement of bulk materials with our Bulk Flow Meter
Contactless measurement of bulk materials
with our Bulk Flow Meter For more than 65 years, Berthold Technologies has been successfully offering solutions for non-contact measurement of level, density, concentration, mass flow and moisture in containers, pipes or conveyor belts. The mass-flow measurement can be easily implemented in all kind of conveyor systems and is the system of choice for reliable and reproducible measurements. The system is particularly suited for monitoring loading- and unloading procedures, respectively material mixing or dosing applications. We can measure the conveying capacity as well as the mass flow (tonnage) of the conveying system. Additionally, batch processes can be monitored. Typical media include powder and granulates, boulder of various sizes, scrap, recycling paper and liquids. While reaching a high rate of reproducibility of measurements of ± 1%, the system is free of any maintenance or need for re-calibration. Environmental influences as wind load, vibration, shock absorption or variances
10.12.2018  |  7518x  |  Product news  | 
Compliance with permitted dust values Continuous dust concentration measurement
Compliance with permitted dust values
Continuous dust concentration measurement A food manufacturer refines dairy products. The dust-laden exhaust air created during the manufacturing process is extracted by suction and cleaned by industrial filter systems. With increasing abrasion of the filter elements, the dust content in the exhaust air may rise and lead to increased environmental pollution. The continuous dust measurement (mg/m³) is also regulated for this process. This official regulation is fulfilled by the plant operator with the installation of a calibrateable, electrodynamic measuring device. Process data Customer: Food manufacturer (Germany) Product: Dairy product powder Permitted limit: 20 mg/m³ Installation location: Clean gas side after a dust cyclone Function: Continuous dust measurement The solution The ProSens system can be calibrated and continuously monitors clean gas sides after filter elements for permissible dust concentrations. The calibration With the Dosed-Reference-Method developed
10.12.2018  |  9575x  |  Product news  | 
Coffee Roasting Plant assisted by Vortex Slide Gates
Coffee Roasting Plant assisted by Vortex Slide Gates
Several years ago, Adams Industrievertretungen – a representative agent for Vortex Global – was approached by a systems group to discuss a new original equipment manufacturer (OEM) opportunity. This particular systems group specializes in the design and construction of roasters and other coffee processing systems. Typically, this systems group would construct their own simple gate valves for use in their coffee roasting systems. But after attending an exhibition where Vortex products were on display, they became interested in Vortex design. In particular, they were impressed with the Orifice Gate. With that, the systems group contacted Adams Industrievertretungen to request a trial order of Vortex Orifice Gates, to be integrated within their coffee roasting systems. Quantity: 2 Vortex Orifice Gates • Size: 200 mm • Designed for indoor service • Gate body constructed from painted carbon steel • Gate blade & material contact areas constructed from
10.12.2018  |  8968x  |  Product news  | 
Easy label creation with data integration Connecting Brady Workstation and Fluke Networks
Easy label creation with data integration
Connecting Brady Workstation and Fluke Networks Easily connect your data using the Brady Workstation Mobile Text Labels app with the integrated LinkWare Live Solution from Fluke Networks® and print your labels using the BMP51 or BMP61 portable label printer. Streamline the process of creating labels on-demand while completing cable testing using a Versiv testing device. Reduce downtime with our world-class label materials that are engineered to withstand the harshest industry environments for long-lasting clear identification. We produce a wide variety of custom or stock die-cut and continuous label materials that are specifically designed for use in electrical and ICT cable and component identification.
06.12.2018  |  7501x  |  Product news  | 
Lutze stays succesful in steelcord belts
Lutze stays succesful in steelcord belts
Lutze BeLux received an order from a Belgian customer for 8 rolls of 310 m steelcord belt. The belt is a 1800 ST 1600 10S/5D with a breaker in the top of the belt. In total 2.480 meters of this heavy duty belt have been ordered. For our Belgian organization this is an important succes and it shows again the strenght of our organization.
06.12.2018  |  1608x  |  Press release  | 
Wingdoor sifter
Wingdoor sifter
Developing a new sifter with improved inspection methods to prevent cross contamination was a challenging task that Dinnissen was happy to accept. Thanks to the extensive experience and expertise, the engineers at Dinnissen developed the custom-made Wingdoor sifter; a perfect combination of innovative power and the sieving process. The major advantage of this machine is that the doors can now open over the entire length of the machine. Therefore, the sieve does not need to be driven out for inspection, so that cross contamination is prevented. The replacement of the sieve mesh is naturally very efficient because the sieve basket can still be moved out of the machine. In addition, the Wingdoor sifter can reach capacities up to 30 tonnes per hour depending on the product.
05.12.2018  |  7523x  |  Product news  | 
Premix production in the feed plant
Premix production in the feed plant
The production of premixes is being focused on more and more lately. The premix is an essential part of any feed-recipe, containing the essential additives that give the end-product the desired taste and nutritional qualities. A production area where recipes are changed often, it is important to accommodate the various products processed in one plant. To ensure product quality, hygiene standards are of upmost importance. Dinnissen Process Technology specializes in the development and production of process technologies and equipment for the feed&aquafeed, food&pharma, pet food and chemical industries. One of the fields we are a specialist in, is the Premix industry. Dinnissen offers an extensive range of products for the Premix producer. Stand-alone machinery, such as the most hygienic Pegasus® Mixer for quick and efficient mixing results and the Pegasus® Vacuum Coater with which to add additives in coated layers, but also complete solutions including pneumatic transport
05.12.2018  |  7176x  |  Press release  | 
Dorner Expands 2200 Series Conveyor Manufacturing in Germany for Faster Delivery to Customers throughout Europe
Dorner Expands 2200 Series Conveyor Manufacturing in Germany
for Faster Delivery to Customers throughout Europe Dorner’s move to begin building its top-selling 2200 Series low-profile belt conveyors in Germany enables customers throughout Europe to take delivery of their equipment faster than ever before. The low profile 2200 Series is a versatile line, engineered for numerous applications and industries, including accumulation, small-part transfers, inclines and declines, automated and manual assembly, packaging and industrial. The conveyor line recently underwent a redesign to make the product stronger, faster and more flexible. It features a robust, single-piece frame design that reduces the overall number of needed stands. The frame comes with a Universal T-Slot that is compatible with industry-standard hardware to make guiding and attaching accessories fast and easy. Additionally, a 5/8” nose bar transfer option with V-Guided belt tracking safely transfers parts at speeds up to 200 feet per minute for increased productivity. New tool-less guiding is fully adjustable,
05.12.2018  |  8624x  |  Product news  | 
Hosokawa Micron expands service fleet
Hosokawa Micron expands service fleet
Hosokawa Micron, global supplier of process equipment and systems for the powder and bulk processing industry, has recently expanded its service fleet with nine brand new Renault vehicles, to provide a growing customer base with outstanding after sales service. Hosokawa Micron’s service team offers technical support – from repairs, maintenance and spare parts service to preventive maintenance, retrofitting, upgrading and refurbishment of powder process equipment. For emergencies, the service team is available 24-hours a day, 7 days a week. To be able to respond quickly and adequately to customer requests, having a reliable service fleet is critical. That’s why one of Hosokawa Micron’s main criteria for selecting new vehicles were the dealer’s after sales. The selection process ultimately led to the local Renault dealer. After a successful test drive on a real service assignment, which included carrying materials to Frankfurt, Hosokawa Micron opted
05.12.2018  |  6195x  |  Press release  | 
Roto-Clean 4900 Cleaning and static neutralisation
Roto-Clean 4900
Cleaning and static neutralisation ATHEX Industrial Suppliers launches an advanced product of Fraser Anti-Static Techniques to clean and neutralise static electricity. The Roto-Clean 4900 blasts pulsating ionized air from single or multiple heads to clean a product and remove static that could attract further dust. The device consists of a dual rotary nozzle driven by a patented centrifugal control integrated into a circular static eliminator. The combination of powerful, pulsating air and static elimination gives Roto-Clean an advantage over alternative products. It will set new cleaning standards in environments that require strict quality control, or when products move on to secondary processes such as labelling or decoration where they must be dust free. The device uses less air delivered at a lower pressure than airknives, delivered at a greater intensity of ions per cubic centimetre. An air bar revolves at 60 revolutions per second using a patented centrifugal control powered solely by
05.12.2018  |  1711x  |  Product news  |   | 
Prefab silos offer many advantages
Prefab silos offer many advantages
Jansen&Heuning has installed a 16 meter high silo in Hoogezand (NL) within 8 hours. This was possible, because the silo was completely designed in 3D and prefabricated with laser-cut parts. But also because the silo was aligned and installed with a top team of three mechanics and professionals of Mammoet. As such, the total construction could continue undisturbed. The silo with a capacity of 180 tons is part of a new kiln system. Our client NEG Glass Fiber will start to use the silo soon to increase the producten of high-quality glass fibers.
04.12.2018  |  2021x  |  Press release  | 
MORE POSTS
NOV
2018
OCT
2018
SEP
2018
AUG
2018
JUL
2018
JUN
2018
MAY
2018
APR
2018
MAR
2018
FEB
2018
JAN
2018
DEC
2017
PORTALS
BulkSolids-Portal Schuettgut-Portal Recycling-Portal
Related
Bulkgids.nl
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked