Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

     

News

Post your news
The new location of Microtrac GmbH Impressions of our new premises
The new location of Microtrac GmbH
Impressions of our new premises On Expansion follows change: When the German location of Microtrac, Inc., which covers EMEA, opened its doors back in 2015, it began with a mere staff of two. After three years of existence, Microtrac GmbH now increased its number in personnel from two to ten – time for a change of location! To the beginning of October 2018, Microtrac GmbH moved from Campus Fichtenhain 42 in Krefeld Fichtenhain to Krefeld Fischeln and can now be found on Kimpler Straße 288, directly inside Sirius Business Park. The new premises offer three times the space for our larger team. We have prepared a selection of images for you that gives insight into a part of our new location and look forward to welcoming you there! Have fun browsing, Your Microtrac team
14.12.2018  |  024x  |  News in brief  | 
New SlimView Group Lock Box for efficient Lockout/Tagout Easily store, carry and apply padlocks
New SlimView Group Lock Box for efficient Lockout/Tagout
Easily store, carry and apply padlocks The SlimView Group Lock Box is an easy to carry lockbox with transparent cover that can store up to 12 padlocks and can double as a safe key deposit. It supports companies to more efficiently organise Lockout/Tagout and to reduce workplace accidents. 15-20% of workplace accidents are still related to maintenance, according to Eurostat. - Efficient and easy to use: a slim design with pre-cut mounting holes enables easy storage or mounting and a transparent door allows for efficient contents checks at all times. - Carry up to 12 padlocks: built-in padlock & key hangers for 12 padlocks. - Safe key deposit: easily apply up to 12 padlocks thanks to a recessed door, in order to lock keys inside until maintenance is done.
14.12.2018  |  019x  |  Product news  | 
Contactless measurement of bulk materials with our Bulk Flow Meter
Contactless measurement of bulk materials
with our Bulk Flow Meter For more than 65 years, Berthold Technologies has been successfully offering solutions for non-contact measurement of level, density, concentration, mass flow and moisture in containers, pipes or conveyor belts. The mass-flow measurement can be easily implemented in all kind of conveyor systems and is the system of choice for reliable and reproducible measurements. The system is particularly suited for monitoring loading- and unloading procedures, respectively material mixing or dosing applications. We can measure the conveying capacity as well as the mass flow (tonnage) of the conveying system. Additionally, batch processes can be monitored. Typical media include powder and granulates, boulder of various sizes, scrap, recycling paper and liquids. While reaching a high rate of reproducibility of measurements of ± 1%, the system is free of any maintenance or need for re-calibration. Environmental influences as wind load, vibration, shock absorption or variances
10.12.2018  |  128x  |  Product news  | 
Compliance with permitted dust values Continuous dust concentration measurement
Compliance with permitted dust values
Continuous dust concentration measurement A food manufacturer refines dairy products. The dust-laden exhaust air created during the manufacturing process is extracted by suction and cleaned by industrial filter systems. With increasing abrasion of the filter elements, the dust content in the exhaust air may rise and lead to increased environmental pollution. The continuous dust measurement (mg/m³) is also regulated for this process. This official regulation is fulfilled by the plant operator with the installation of a calibrateable, electrodynamic measuring device. Process data Customer: Food manufacturer (Germany) Product: Dairy product powder Permitted limit: 20 mg/m³ Installation location: Clean gas side after a dust cyclone Function: Continuous dust measurement The solution The ProSens system can be calibrated and continuously monitors clean gas sides after filter elements for permissible dust concentrations. The calibration With the Dosed-Reference-Method developed
10.12.2018  |  112x  |  Wiki item  | 
Coffee Roasting Plant assisted by Vortex Slide Gates
Coffee Roasting Plant assisted by Vortex Slide Gates
Several years ago, Adams Industrievertretungen – a representative agent for Vortex Global – was approached by a systems group to discuss a new original equipment manufacturer (OEM) opportunity. This particular systems group specializes in the design and construction of roasters and other coffee processing systems. Typically, this systems group would construct their own simple gate valves for use in their coffee roasting systems. But after attending an exhibition where Vortex products were on display, they became interested in Vortex design. In particular, they were impressed with the Orifice Gate. With that, the systems group contacted Adams Industrievertretungen to request a trial order of Vortex Orifice Gates, to be integrated within their coffee roasting systems. Quantity: 2 Vortex Orifice Gates • Size: 200 mm • Designed for indoor service • Gate body constructed from painted carbon steel • Gate blade & material contact areas constructed from 304 stainless
10.12.2018  |  133x  |  Product news  | 
Easy label creation with data integration Connecting Brady Workstation and Fluke Networks
Easy label creation with data integration
Connecting Brady Workstation and Fluke Networks Easily connect your data using the Brady Workstation Mobile Text Labels app with the integrated LinkWare Live Solution from Fluke Networks® and print your labels using the BMP51 or BMP61 portable label printer. Streamline the process of creating labels on-demand while completing cable testing using a Versiv testing device. Reduce downtime with our world-class label materials that are engineered to withstand the harshest industry environments for long-lasting clear identification. We produce a wide variety of custom or stock die-cut and continuous label materials that are specifically designed for use in electrical and ICT cable and component identification.
06.12.2018  |  113x  |  Product news  | 
Following 6 items
ARCHIVE
DEC
2018
NOV
2018
OCT
2018
SEPT
2018
AUG
2018
JULY
2018
JUNE
2018
MAY
2018
APR
2018
MAR
2018
FEB
2018
JAN
2018
PLATFORMS
SchuettgutPortal Recycling-Portal Solids Processing
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertisingControl panel log-in