 | |
Short Description
- detection of particle in a range from 60 to 6,000 µm
- applicable for differences between correctly sized grain and undersize/oversize of as little as 85 µm
- applicable for all kinds of screening machines, regardless of the make
- signal transmission possible via Profi-Bus interface
- easy retrofitting
Range of Application:
Applicable in all conventional screening machines for detection of pourable bulk goods. The particle measuring devices JEL Horus an be used in all areas of the chemical, pharmaceutical, food-processing, plastic and similar industries.
Operation:
The fine material of the screening machine flows through the product downpipe.
By means of the product guide place, the amount of product required for measurement is constantly fed into the optical system. There, the product is detected and the measuring results are assessed accordingly.
This process is constantly performed and therefore constitutes real on-line particle measurement. By means of the supplied software the monitoring range can be individually adjusted to the product. In case of deviation from the pre-set grain range, a signal is generated that can be used for further processing (e.g. in a process control system present at the customer´s site.)
Advantages:
- permanent monitoring of the screening process by real online particle measurement
- applicable for a large range of grain types (particle diameters from 60 to 6,000 µm)
- prevention of high consequential costs in case of screen breakage or pass-over of the machine
- rapid detection of screen breakage without elaborate sampling and analysis
- parameters ca be individually adjusted to the respective product
- pass-over of the screening insert is immediately displayed without requirement for elaborate sampling and
analysis
- parameters can be individually adjusted to the respective product
- pass-over of the screening insert is immediately displayed without requirement for elaborate sampling and
analysis
- no cleaning effort thanks to self-cleaning system
- time-saving output optimization during commissioning of screening machines
- can be easily retrofitted to existing screening machines - regardless of the make
|
