 | |
The Fluid Bed Moisture Analyser hydorpharm by Döscher & Döscher/ AMS is the innovative inline moisture analyser for fluidised bed dryers.
In contrast to the Near Infrared Method (NIR) the hydorpharm is insensitive to contamination of the sensor surface and measures the dampness of the fluidized bed particles independent of density, size, structure and colour.
After a calibration by means of a reference method (e.g. Loss Of Dry method (LOD) or the Karl Fischer Tritration) the product moisture is continuously supervised until the target moisture is reached. It’s not necessary to clean the sensor surface during the process. Thereby a careful drying of granulates,pellets and coating particles is feasible. The hydorpharm provides all measured values standard signals (4-20 mA). This allows further processing in external control devices, e.g. visualizations.
Following variations exist:
hydorpharm C100
The measuring system was conceived for middle to big production plants.
Over a standard flange is the hydorpharm fbma 100 connect with the fluidized bed dryer.
hydorpharm C32
The measuring system was conceived for small to middle laboratory and production plants. Over a standard clamping connecting piece is the hydorpharm fbma 32 connect with the fluidized bed dryer.
|
