 | |
The GRAF company based at Teningen has recently commissioned a coextrusion blow-moulding machine manufacturing products for rainwater use with a volume of up to 3000 l. The Graf company has a large product range all about water management and is the greatest German manufacturer of rainwater containers.
The multilayer containers are produced in one single production step and side products of each finished part are tops and tails with a unit weight of more than 20 kg, the weight of the purgings can be many times higher. A Herbold granulator of the SMS series recycles these tops and tails, still warm, next to the line where they are produced. Herbold Meckesheim GmbH is the manufacturer of this turn-key customised grinding plant.
A characteristic feature of this plant is the little power input needed for the size-reduction of these viscoplastic high-molecular PE tops and tails – this was in the end run the decisive criterion for GRAF to decide in favour of the Herbold granulator.
The delivered plant consists of a belt conveyor, the granulator itself of the SMS 60/100 series, a suction unit and sound insulation for sound level below 80 dB. ( Fig.1: Grinding plant with Herbold granulator SMS 80/160)
Herbold granulators work with a true double cross cutting action: Not only have the rotor knives been mounted at an inclined angle but also the stator knives have been mounted at an inclined opposed angle: this staggered configuration is the only one to ensu
|
