 | |
Recipes harmonised down to the last gram are a guarantee of quality in the compound and masterbatch industry. The ideal feeders must therefore be fully harmonised to the properties of the bulk materials and feed rates and need to be flexible in terms of spatial requirements as well.
As previously announced, Schenck Process has extended the ProFlex® C feed system to include the 6000 Series for this very reason. The ProFlex® C feed system unveiled at POWTECH 2008 is used for volumetric and gravimetric feeding of additives and fillers in powder, granulate or fibre form, which are needed for the refinement of plastics.
Depending on feed rate requirements, we would recommend using either the ProFlex® C500 or ProFlex® C6000 variants. Both basic models can be complemented with various feed hoppers, feed screws and spirals.
Space-saving, flexible, quality-enhancing.
The ProFlex® C500 and ProFlex® C6000 Series from Schenck Process are characterised by their flexible and space-saving geometries. The asymmetric design allows the feeders to be arranged in pairs with discharge nozzles fitted close to one another. For service purposes, the system need only be accessed from two sides.
|
