|
Characteristics
Possible net value that can be weighed in:
up to 5 kg.
Dosing performances from 0.1 up to 1.0 dm3/min can be realized.
In batch mode, weighing accuracy of up to ± 0.5 g attainable.
Dosing material hopper made of light alloy, available volume 3 dm3.
High dosing and weighing accuracy even at very small set values.
Strain gauge transducer.
Optimal tare / net ratio.
Absolute operating safety even under hardest operating conditions due to robust construction.
No recirculated air and/or aspiration troubles.
Casing closed on all sides, equipped with filling and aspiration nozzle.
Provided with shut-off valve to prevent in-flight-material.
Application
Wherever the precise dosing of powdery or granule type products in compliance with the related laboratory accuracy standards - even under hardest operating conditions - is required.
Also suitable for badly flowing and/or bridging types of products and materials due to optional stirring device.
Functional principle
The device operates in accordance with the gravimetric dosing principle realised with a screw feeder integrated in a full load weighing system. Bulk material and tare load are being weighed both at the same time.
The dosing material hoppers are either filled manually or fully automated, e.g. by means of dosing devices of the DSR 25 series.
|
