 | |
Our recommendation for all processing laboratories with a continuous delivery of brittle to very hard materials for batch or continuous fine grinding. The maximum feed particle size is approx. 20 mm edge length. The fineness attainable (d50) is down to approx. 12 mm (largest gap width) or 0.1 mm (smallest gap width).
The maximum throughput of 150 kg/h depends on the gap setting and the hardness of the sample. The relatively large throughput enables it to be used in the pilot scale or in the small size production, for example: slag-disintegration for the reclamation of precious metals.
Features of performance:
reproducible grinding results through accurate gap setting (exactly 0.1 mm)
precision adjustment for setting gap
sight glass for checking gap width
centrally located toggle-type fastener for grinding chamber
divided, hinged grinding chamber
4 different materials for grinding disks, to ensure that contamination of the samples through abrasion of the grinding elements is avoided during processing.
grinding disks easily accessed and replaced
life expectancy of grinding disks can be doubled by changing the rotational direction of the motor
simple cleaning and dust-free grinding due to dust exhauster connection
continuous fine grinding from 95 mm to 0.1 mm in a single process through combination with the laboratory jaw crusher PULVERISETTE 1
can be adjusted to individual throughput requests (optional
conversion
|
